•
VoiceAlert
2
User Manual
Code 02 - Adding Recipient Telephone Number 2
Prerequisite for basic VA
2
operation:
NO
Reason for Configuration:
To activate multiple telephone number event notification and or if require dual
function of message playback via voice call and over built in speaker is required.
Background info:
When zone is triggered, VA
2
will first dial the stored telephone number for address 01. If
recipient 01 does not answer phone, VA
2
will then dial recipient number 02. If recipient 02 answers, VA
2
will
playback zone voice message (alarm notification) over the phone. Recipient 02 can then make decision to
listen to the message again by pressing 11 on telephone keypad or hanging up by pressing 00 (see
telephone commands under Telephone Commands Section).
If you have already added a telephone number for address 01, then you do not need to add a number for
code 02, unless of course you require VA
2
to dial more than one telephone numbers when alarming.
Function Options:
1. Set recipient telephone number for voice call recipient 2.
2. If the recipient number is an alarm call centre, you can set a 4-digit code (xxxx) by appending the
code after the telephone number. This will allow the call centre to identify the user account. This
function is only available if alarm call centre is available (Details in advanced Manual)
3. Delete telephone number for voice call recipient 2
Procedure:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
02
using the numeric keys
•
Press
OK
•
Enter telephone number
•
Press
OK
•
LCD will Display as above
•
Press
Return
to exit
Procedure – Set Function Option 2:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
02
using the numeric keys
•
Press
OK
•
Enter telephone number * xxxx
•
Press
OK
•
LCD will Display as above
•
Press
Return
to exit
Procedure – Set Function Option 3:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
02
using the numeric keys
Copyright InFocus Trading 111 cc, 2009
15
