WirelessAlert VA-2, User Manual

Page: 13 / 61

•
VoiceAlert 2 User Manual
alarm etc.) (Detailed in advanced manual).
28 Code 28 -Set time for daily test report to alarm centre
number…. Alarm centre needs to be set up for this feature
to function (Detailed in advanced manual). Empty
29 Code 29 – Allocate Wireless Zones to Voice Message
Segments 1*2*3*4*5*6*7*8 31
30 Code 30 – Allocated Wired Zones to Voice Message
Segments 1*2*3*4 31
31 Code 31 – Reset VA2 to Factory Default Not set 32
32 – 36 Not defined
37 Code 37 - Set VA 2 to vibrate when alarming (Detailed in
advanced manual)
Empty
38 Code 38 – Set Zone Arming Trouble Audible Indication Empty 33
39 Code 39 – Set Armed Zone Restored Warning Not set 33
40 Code 40 – Recording Voice Message Segments Not set 34
41 Code 41 – Listen to Single Recorded Message Segment Not set 35
42 Code 42 – Listen to All Recorded Message Segments Not set 36
43-49 Not defined
50 Code 50 – Coding Remotes onto VA2 Not set 37
51 Code 51 – Coding of Wireless Sensors onto VA2’s
Wireless Zones Not set 38
52-67 Not defined
68 Code 68 – Set Arming Missed Call Notification Not set 40
69 Code 69 – Set Disarming Missed Call Notification Not set 41
70-79 Codes 70 to 79 – Check Alarm Log for the 5th – 14th Most
Recent Alarm Event Not set 41
80-87 Codes 80 to 87 – Check Alarm Log for the 1st – 8th Most
Recent Arm Event Not set 42
88-89 Not defined
90-97 Codes 90 to 97 – Check Alarm Log for the 1st – 8th Most
Recent Disarm Event Not set 43
Configuration Codes
Code 01 - Adding Recipient Telephone Number 1
Prerequisite for basic VA
2
operation: YES
Reason for Configuration: Must be set for telephonic Zone alarm event notification and or Zone voice
message playback over VA 2 ’s built-in speaker.
Background info: When any zone is triggered, VA
2
will dial the stored telephone number for recipient 1
(landline or cell phone). If recipient answers phone, VA 2 will playback zone voice message (alarm
notification) via the voice call. The recipient can then make decision to listen to the message again by
pressing 11 on telephone keypad or hanging up by pressing 00 (see telephone commands under Telephone
Commands Section).
Please store a telephone number for address 01, regardless of whether VA 2 is connected to telephone line or
not. If there is no number set for code 01 then VA 2 will not be able to perform certain key functions including
playback of zone voice messages over the built-in speaker.
Function Options:
1. Set recipient telephone number for voice call recipient 1.
Copyright InFocus Trading 111 cc, 2009 13