1
TORCH WIZARD INSTALLATION & OPERATION MANUAL
wire-wizard.com
1.0 INTRODUCTION
This guide is designed to assist the user whose primary responsibility is to maintain and operate the Torch Wizard® Nozzle
Cleaning Station. This manual provides specific information on installation, safety, basic operation, and maintenance.
Please read, understand and follow all safety procedures.
Torch Wizard® Nozzle Cleaning Stations offer fast and efficient cleaning cycle times for high production rates.
The complete sequence of the Torch Wizard® Nozzle Cleaning Station must be started and controlled by a robot controller,
programmable logic controller (PLC), or some other superior control system. See sequence of operations on page 7 for details.
This model of nozzle cleaning station is designed for dry reaming applications and does not utilize anti-spatter spray.
1.1 WARRANTY
ONE YEAR LIMITED WARRANTY TERMS AND CONDITIONS:
ELCo Enterprises, Inc. shall warrant the Torch Wizard® Nozzle
Cleaning Station to be free of defects in material and/or workmanship for one (1) year from the date of shipment to the
Buyer. The warranty shall cover 100% of all parts and labor with the exception of misuse, abuse, neglect and typical
consumables as determined by ELCo. This limited warranty excludes all sprayer components, which are warranted to
be free from defects and/or workmanship for 90 days from the date of shipment to the buyer.
Failure to follow proper
installation and maintenance procedures specified in this operation manual will void this warranty. This includes
the use of a Filter/Regulator/Lubricator (FRL) without auto-drain functionality.
ELCo will, at its option, repair, replace
or issue a credit for the value of the defective Torch Wizard®.
Buyer accepts all responsibility for compliance with any/all Local, State and Federal Laws or Regulations including
Regulations of Foreign Governments.
No equipment shall be returned to ELCo without a Return Authorization Number from ELCo. Upon evaluation and
determination of warranty, replacements or repairs will be sent to the Buyer. If a replacement is needed immediately, a
purchase order is required to cover the cost of the product until the warranty is determined.
ELCo’s warranty is limited to replacing any goods that are proved to be defective and ELCo in no event shall have any
liability for paying incidental or consequential damages including and without limitation, damages resulting in personal or
bodily injury or death, or damages to, or loss of use of any property. Notwithstanding any of these terms and conditions,
the warranties set forth shall apply in connection with any sales of goods, services or design by ELCo and are in lieu of all
other warranties, express or implied, including warranties of merchantability and fitness for a particular purpose.
