SERVICE MANUAL & ICA
WIPLINE 2100 & 2350 FLOATS
Page 50
Revision N
P/N 1002549
The water rudder retract system is manually operated by a lever through a system of cables and pulleys.
Steering is directed from the aircraft rudder steering system.
9.0 DESCRIPTION
Rigging of the water rudder steering cables is accomplished by centering the airplane rudder and adjusting the
turnbuckles such that both rudders trail with the float centerline. Cables should be tensioned to 10 pounds, +/- 5
psi.
Retraction cables should be rigged such that the rudder blade is in the up position and that the cables are just
slack in the down position.
9.1 ADJUSTMENT
Cables – inspect for fraying annually. Pulleys – inspect and lubricate annually.
9.2 SERVICE SCHEDULE
