6
1.3
Median calibration and median offset
Hold the handle firmly at the target position with your hand, and adjust the clearance between
the top wire and the wrench to adjust the gap to no gap (median deviation ±5°).
`
1.
Rotate the left and right two top screws clockwise to eliminate the clearance;
2.
Rotate the left and right two top screws counterclockwise to eliminate the clearance;
1
2
Summary of Contents for Super Libra J1
Page 4: ...3 1 2 Disassembly steps 4 PCS 8 PCS 1 2 3 ...
Page 5: ...4 4 5 6 7 8 ...
Page 16: ...15 ADJUST ...