Wintriss wpc 2000, User Manual

Page: 216 / 250

WPC 2000 User Manual 1128500
Option 1 User Inputs C-5
Wiring Option 1 User Inputs
Wiring connections for WPC 2000 Option 1 user inputs are made on terminal blocks TB601
and TB602 on the Option 1 board (see Figure C-2). Pin numbers are shown in Table C-2 and
Table C-3, page C-6, and in Figure 20 at the end of the manual.
Wire from the terminal shown in Table Table C-2 or Table C-3 to your equipment and then
back to 24 Vdc or ground. If you remove any of the jumpers installed at the factory,
make sure to bypass those inputs by connecting them to +24 Vdc or ground, as shown in
Table C-2 or Table C-3. TB601 provides one +24 Vdc terminal and one ground terminal for
jumper connections. TB602 provides two +24 Vdc terminals and two ground terminals.
Figure C-2. WPC 2000 Option 1 Board
+5V
A processor
LED
DS630
+5V
B processor
LED
DS629
438 439 440 441 442 443 444 445 446 447
431 432 433 434 435 436 437
448 449 450 451 452 453 454
455 456 457 458 459 460 461 462 463 464
TB601
TB602
8
14
1 7
1
10
11
20
TB602 user input wiring connectors
TB601 user input wiring connectors
Group 8 LEDs Group 9 LEDs Group 11 LEDs Group 10 LEDs