Wintriss SmartPAC PRO Servo, User Manual

Page: 178 / 228

1147100 SmartPAC PRO Servo User Manual
178 Chapter 6
– Run Mode
Figure 6-19. Tool Number Information Screen
To change tool information, do the following:
1. Select TOOL INFORMATION on the Main Run Menu. The Tool Number Information screen
displays.
NOTICE
ARE YOU LOCKED OUT?
Access to items on this screen may be limited to Program mode or may require a password. The
security access settings in Initialization mode determine when changes can be made. See Table
4-5, page 94.
2. Select a parameter you want to change. The Numeric Entry window displays.
3. Key in a new value, following the directions in the Numeric Entry window. For Yes/No items,
key in “0” for No, “1” for Yes. Press ENTER when you are finished. You are returned to the Tool
Number Information screen with your change displayed in the field you selected in step 2.
4. Repeat steps 2 and 3 to change other parameters, as necessary.
5. To enter text into the memo box, press LINE 1 OF THE MEMO for the first line and press LINE
2 OF THE MEMO for the second line. When the text entry window displays, key in your entry
and press Enter. The window closes, and your entry appears on the first and/or second line of the
memo box.
6. When you have finished changing tool information, press BACK to return to the Main Run
Menu.