Wintriss SmartPAC 2, User Manual

Page: 454 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
E-14 SmartView
E-mail Setup
You can enter new or edit existing recipient email addresses and messages on the E-mail
Setup Page (see Figure E-11, page E-15), which you access from the SmartView Setup Page
by clicking on the Email Setup link.
To add, change, or delete email information, do the following:
1.
Click on the Down Arrow (

) in the Select a Press window, then select the press for
which you want to enter or edit email information.
Existing names/email addresses and messages for that press display in the two large
windows on the screen. A status box displays to inform you that the data has been
received and is ready to change.
2.
To add an email name/address entry, click in the Name window, and type the person’s
name, then click in the Email Address window, and type his or her E-mail address. Click
on the
Add
button. Your entries are displayed in the large window beneath the Name and
E-mail Address windows.
3.
To add an email message entry, click in the Messages window, type the text of the
message, and click on the
Add
button. Your entry is displayed in the large window beneath
the Messages window.
Figure E-10. SmartPAC 2 Remote Message
You can also type the name and email address entries, separated by a comma, on a line
in the large window.
NOTICE