Wintriss SmartPAC 2, User Manual, Page: 428 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
C-14 Preventive Maintenance Monitor
3.
The next display shows that one of the items, “Slide Adjust Motor,” is now in “alert”
status mode. It flashes on the screen. Also, the number of items in alert status mode
appears at the top of the screen.
4.
To view other items in the schedule that may or may not be in “alert” status, use the cursor
keys. If more than three PM items were set in Initialization, they will not all appear on the
screen. To view them, simply use the cursor keys to scroll down the list.
5.
To clear the alert, first highlight that item, press the appropriate function key (designated
on your screen), and enter the PM password.
6.
If you want to change the frequency value on a given PM item, first highlight that item,
press the designated function key, and enter the PM password. The number display will
be superimposed over the screen (similar to Figure C-9). Use the number keys or cursor
keys to modify the tracking frequency for that PM item.
7.
Once you are done viewing or modifying this screen, press RESET to return to the main
Run menu.
Figure C-15. Run Mode Screen Showing “Slide Adjust Motor” in “Alert” Mode
When you clear the alert condition for a certain item, you automatically reset its current
value to zero. You cannot recall the previous value.
USE CURSOR KEYS TO CHANGE SELECTION
PRESS ENTER TO SELECT, RESET WHEN DONE
CLUTCH VALVE
CHECK AT
CURRENT
2000 STARTS/STOPS
1055 STARTS/STOPS
YOUR PRESS NAME
THERE IS 1 ITEM WITH ALERT STATUS PM MONITOR
SLIDE ADJ. MOTOR
CHECK AT
CURRENT
100 DIE CHANGES
101 DIE CHANGES
GIBS
CHECK AT
CURRENT
1000000 STROKES
558836 STROKES
MORE
PM Monitor alerts
you to check specific
item in "alert" status mode.
Notice "!!ALERT!!"
flashes.
CLEAR
ALERT
F3
CHANGE
VALUE
F4
shows how many alert
alert conditions are
current
!! ALERT!!
NOTICE