automatically when the runtime expires.
6.
Remote engine shut off
To remote stop engine running, press and hold
【
】
,can engine will shut off with 2 confirming siren
chirps and 2 parking light flashes.
l
The remote transmitter sounds melody with its LCD showing engine shutoff icon and current status.
7.
Remote temperature-controlled start “ON/OFF”
【
Refer to Features Program table at #36, 37or
Remote transmitter’s functions table
】
To turn “ON” this remote temperature-controlled start feature, press and hold both
【
】【
】
simultaneously . Siren chirps 3 times with 3 parking light flashes. [Refer to #36 for temperature setting].
When the pre-set temperature is reached, the engine start automatically
l
The remote transmitter sounds melody with LCD showing temp-start icon. To turn this feature “OFF” To
turn this feature “OFF”, press both
【
】【
】
simultaneously. The remote transmitter sounds melody but
its LCD does not show tem-start icon.
8.
Programmed daily start-time “ON/OFF”
【
Refer to Features program table at # 37
】
Press and hole both
【
】【 】
simultaneously at the desired time of the day to make the engine
automatically start at the same time beginning the next day. Siren chirps 6 times with 6 parking light
flashes. Press and release both
【
】【 】
to deactivate this function.
l
The remote transmitter sounds melody with its LCD showing daily start-time icon “ON” and this features
standby mode .Engine begins running immediately in this mode.
。
For runtime setup, refer to Program table
at # 36. Engine run shuts off when preset time expires.
When the Engine start is done, the remote transmitter sounds melody with its LCD showing current status
modes.
9.
Status Check
Press button
【
】
to monitor the latest vehicle status. The parking light flashes 3 times,
。
l
The remote transmitter sounds melody and its LCD showing vehicle’s status.
10.
Activate channel # 1 release trunk
Press and hold
【
】
to release trunk regardless of either lock/arm or unlock/disarm mode. Trunk is
released with 3 parking light flashes and siren chirps 3 times.
l
The remote transmitter sounds melody showing the trunk release icon and the car’s status.
11.
Remote siren /horn ON/OFF
【
Refer to Features program table at # 36 or Remote transmitter’s features
table
】
Press and release
【 】
to select between siren “ ON” and “OFF”.
l
The remote transmitter’s LCD shows siren and music note if the siren setting is “ON” .The LCD will not
show the siren and music note if siren is set “ OFF”.
12.
Activate channel 2 headlight delay
【
Refer to Features program table at #36
】
To activate head light delay, press and hold
【 】
[ Channel # 2 activated features can be programmed as
required, as in this section for 30 sec head light delay ] either in arm or disarm modes. Following 2
parking light flashes, headlight stays on 30 sec before it automatically turns off. Another press on the
same button can shut off this feature.
l
Remote transmitter sounds melody and its LCD showing the car’s status.
13.
Car locator/search
To locate the car, press and release both
【
】【
】
simultaneously
，
siren chirps 6 times with 6 parking
light flashes.
l
Remote transmitter sounds melody with its LCD showing car’s status.
