ITX-M-CC452-T10/Configuration
v1.0
www.winsystems.com
Page 26
6.5.21 J14 - Ethernet (RJ45) 1 and 2
The Type 10 module supports one Gigabit Ethernet port to the ITX-M-
CC452-T10, which provides one Ethernet port to the right RJ45 connection
on
J14
.
A second Gigabit Ethernet port is provided by the ITX-M-CC452-T10 via
PCIe bridge to the left RJ45 connection on
J14
.
6.5.22 J21 - USB 3.2 Gen 1 Type-A
The Type 10 module supports two USB 3.2 Gen 1 ports to the ITX-M-
CC452-T10, which provides two USB 3.2 Gen 1 ports to
J21
. These ports
supply 1 A maximum continuous current and 5 Gbps transfer speed.
6.5.23 J24 - USB 2.0 Type-A
The Type 10 module supports five USB 2.0 ports to the ITX-M-CC452-T10,
which provides two USB 2.0 ports to
J24
and three USB 2.0 ports to each
Mini-Card #1-3. These ports supply 500 mA maximum continuous current
and 480 Mbps transfer speed.
6.5.24 J12 - USB Touchscreen
J12
provides plug-and-play support for a USB touchscreen. Aside from a
simpler and faster interface, it also provides power within the USB cable,
eliminating the need for a separate, dedicated cable to power the
touchscreen.
Layout and Pin Reference
Connector
• Molex 1.25 mm PicoBlade
Part Number: 53398-0571
Matching Connector
• Molex 1.25 mm PicoBlade housing
Part Number: 51021-0500
Type 10 module
Ethernet port
ITX-M-CC452-T10
Ethernet port
Pin
Name
1
GND
2
+5 V SB
3
DATA+
4
DATA-
5
GND
1
