background image

EPX-C414/Configuration

v1.0

www.winsystems.com

Page 21

7.8.2 Standard

Standard requires changing the default I/O ranges within the BIOS.

The watchdog can be enabled or disabled via software by writing an appropriate timeout 

value to I/O port 29EH. See the table below.

7.9 Real-time Clock/Calendar

A real-time clock is used as the AT-compatible clock/calendar. It supports a number of 

features including periodic and alarm interrupt capabilities. In addition to the time and 

date-keeping functions, the system configuration is kept in CMOS RAM contained 

within the clock section. A battery must be enabled for the real-time clock to retain time 

and date during a power down.

7.10 Connectors

7.10.1 PWR Power and Reset

Power is applied to the EPX-C414 via the connector at PWR. DC 5V is the main supply 

to the board. The +12V and -12V DC are not required for the basic SBC operation, this 

supplies the PC104, PC/104-Plus, and backlight connectors. 

A jumper is provided to short 5V and 5V Stand_by. This is used when an AT power 

supply is connected to the system and pin 6 of PWR connector is open (not connected 

to +5V).

WinSystems offers the cable CBL-265-G-2-1.5 to simplify this connection.

Table 20: 

Timeout Values

Port Address

Value

Reset Interval

29EH

00h

DISABLED

01h

3 SECONDS

03h

30 SECONDS

05h

300 SECONDS

29FH

ANY

RESET TIMER

Summary of Contents for EPX-C414






















































































Reviews: