GPS Head Up Display
User Manual
Thank you for purchasing our GPS HUD. This product is for drivers’ safety, at high speeds,
especially in high-speed driving at night, in order to avoid the driver to look down their head to
watch the instrument, and decrease car accident. HUD is in extremely critical moment reflects its
delicate care. HUD can project the important information displayed by the instrument (such as
speed) onto the windshield, it can not only to help determine the speed of inexperienced novice to
control their speed and avoid many of the speed limit road due to speeding violation. More
importantly, it enables the driver instantly read the number in great vision and always make
drivers eyes on the road in clear mind.
Apply for all cars in the world
Display information :Vehicle speed, real time,over speed alarm, compass,altitude, auto sleeping
mode.
Above functions are projected on the windshield to remind driver to be safe.
Smart Display Function
After vehicle stop for 10s, HUD automatically switch to satellite time status, and when vehicle
start, HUD automatically switch to the vehicle speed state.
Installation of HUD:
For HUD:
1.Place HUD on the proper position of wind instrument panel, then plug car charger into the
cigarette lighter inside, and connect HUD with the USB interface.
2.In the instant energized, the LED of the host will be fully lit, and then give out a "tick", the host
back to sleeping mode, while the satellite signal icon starts blinking. Host automatically search the
satellite signal status, after a few seconds,the host will search one satellite signal,the clock will be
displayed in the host window. Upon receipt of a successful satellite positioning,satellite icon lights
off, while the satellite signal strength indicator signal lights size.
For reflection film:
First place HUD on non-slip mat, after decide the HUD place, then stick the reflection film on the
windscreen.
Summary of Contents for A1-GPS HUD
Page 7: ......
