background image

1-7

SECTION 1 –

INTRODUCTION

2011 NEW VEHICLE LIMITED WARRANTY

WINNEBAGO INDUSTRIES, INC.

WARRANTY COVERAGE TO OWNER

Winnebago Industries, Inc. of Forest City, Iowa, warrants each new 
Winnebago and Itasca motor home to the owner for recreational use 
in the U.S.A. and Canada as follows: 

BASIC LIMITED WARRANTY 

WINNEBAGO INDUSTRIES’ RESPONSIBILITY

Any part of the vehicle subject to this warranty that is found to be 
defective in material or workmanship under normal use and 
maintenance will be repaired or replaced at Winnebago Industries’ 
option without charge to the customer for parts or labor upon notice 
of the defect.

WARRANTY PERIOD

The basic Warranty Period is 12 months or 15,000 miles (24,135 
kilometers), on the odometer, whichever occurs first. The Warranty 
Period for all coverages begins on the date the vehicle is delivered to 
the first retail purchaser or first placed in service as a demonstrator 
or company vehicle. 

ONLY WARRANTY

This limited warranty is the only warranty made or authorized by 
Winnebago Industries. Winnebago Industries makes no other 
promises, representations or warranties concerning the vehicle or 
other matters set forth herein. Winnebago Industries does not 
authorize any person to create for it any other obligations or liability 
in connection with this vehicle.  

DEALER’S REPRESENTATIONS EXCLUDED

Winnebago Industries shall not be bound by any undertaking, 
representation, or warranty made by any dealers selling its product 
to any purchaser of its products. 

EXCLUSIVE REMEDY

THE PERFORMANCE OF REPAIRS IS THE EXCLUSIVE REMEDY 
UNDER THIS LIMITED WARRANTY OR ANY IMPLIED 
WARRANTY.  ANY IMPLIED WARRANTY OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO 
THIS VEHICLE ARISING BY WAY OF STATE LAW IS LIMITED IN 
DURATION TO THE DURATION OF THIS WRITTEN WARRANTY 
AS HEREINBEFORE OR HEREINAFTER PROVIDED. 

LIMITATION ON LIABILITY

WINNEBAGO INDUSTRIES SHALL NOT BE LIABLE FOR 
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING 
FROM BREACH OF THIS WRITTEN WARRANTY OR ANY 
IMPLIED WARRANTY.  SUCH DAMAGES INCLUDE, BUT ARE 
NOT LIMITED TO, LOSS OF TIME, INCONVENIENCE, OR OTHER 
CONSEQUENTIAL DAMAGE INCLUDING EXPENSE FOR 
GASOLINE, TELEPHONE, TRAVEL, LODGING, LOSS OR 
DAMAGE TO PERSONAL PROPERTY, OR LOSS OF REVENUE.  
Some states do not allow limitations on how long an implied warranty 
will last or the exclusion or limitation of incidental or consequential 
damages, so the above limitations or exclusions may not apply to 
you.

ITEMS NOT SUBJECT TO WARRANTY COVERAGE

Chassis, drivetrain and related components* 
Wheels*
Tires* 
Any other part or component covered by a written warranty issued by 
its manufacturer* 
Service Items, such as Windshield Wiper Blades, Lubricants, Fluids 
& Filters 
Adjustments
Rust and Corrosion 

*These items are covered under the manufacturer’s individual 
warranty. 

ADDITIONAL EQUIPMENT NOT COVERED

Winnebago Industries cannot and does not accept any responsibility 
in connection with any of its motor homes for additional equipment or 
accessories installed at any dealership or other place of business, or 
by any other party other than Winnebago Industries. Such installation 
of equipment or accessories by any other party will not be covered 
by the terms of this warranty. 

36 MONTH/36,000 MILE STRUCTURAL WARRANTY 

At the expiration of the Basic Coverage and for the remainder of the 
period of 36 months or 36,000 miles (57,924 kilometers), on the 
odometer, whichever occurs first, Winnebago Industries warrants the 
following: 

1.  Structural defects of the subfloor, floor, and slide-out room. 

Floor lamination failure and lamination failure of the subfloor 
panels and risers are covered by the structural warranty. 

2. Body 

Thermo-Panel

®

 Lamination of the sidewalls and backwall 

against delamination. Body Thermo-Panel

®

 Lamination is the 

bonding of the exterior skin and the interior paneling to an 
insulating core material. Delamination (separation of layers) 
caused by other factors such as physical damage or failed 
sealants is not covered by this warranty. 

This warranty gives you specific legal rights and you may also have 
other rights which vary from state to state. 

Also, this warranty shall not apply to failures, damage or 
malfunctions resulting from normal wear, misuse, abuse, negligence, 
alteration, accident, fire, improper repair of the vehicle or failure to 
follow recommended maintenance requirements. 

OWNER’S RESPONSIBILITY-CARE AND MAINTENANCE

It is the owner’s responsibility to perform the care, maintenance and 
proper load distribution described in the operator’s manual which 
accompanies your motor home. Any damage which results to your 
vehicle as a result of your failure to perform such duties, is not 
covered. 

Damage to appearance items such as fiberglass, metal, paint, 
fabrics and trim, may occur during manufacturing or transporting. 
Normally, any factory defect or damage is corrected at the factory. In 
addition, dealers are obligated to inspect each vehicle upon delivery 
to them and prior to delivery to you. You should also immediately 
inspect appearance items and advise your selling dealer of any 
discrepancies. Damage and deterioration due to use and exposure, 
such as rust or corrosion is not covered by this warranty. 

Summary of Contents for Suncruiser



































































































































































Reviews: