![background image](http://html.mh-extra.com/html/winnebago/suncruiser/suncruiser_user-manual_987377104.webp)
SECTION 8 –
ENTERTAINMENT
8-10
DISH NETWORK
®
SATELLITE
RECEIVER
–If Equipped
To Watch Dish Network
1. Power ON TV and Video Selection Box.
2. Determine which TV you want to use (e.g.
TV1 for Main TV) and select “SAT” from the
Video Selection Box.
3. Power ON Dish Network Receiver.
NOTE: There must be a clear “line of sight” to
the satellite. Mountains, buildings, trees,
telephone poles and other obstructions
can all block the satellite signal from
reaching the dish.
4. Power ON the Automatic/In-Motion Satellite
Dish Control. See “TV Digital Satellite
System (Automatic/In-Motion) information
elsewhere in this section for operating
instructions.
Dish Network Remote Control
A 4-component remote control is provided in
your InfoCase and can be programmed to operate
up to three additional components, such as TV,
VCR, and DVD player.
See the Dish Network Quick Reference Guide
provided in your InfoCase for easy remote
navigation information.
Further Information
See the manufacturer’s user guide provided
in
your InfoCase for a complete description of
features and operating instructions.
Video Selection Box
(Located in entertainment
center cabinet)
Dish Network Receiver
(Located in entertainment
center cabinet)
Automatic/In-Motion Satellite Dish Control
(Located in overhead cabinet or
entertainment center cabinet,
depending on model)
Dish Network Remote Control
(Provided in your InfoCase)