9-1
5 - DASH / AUT
O
SECTION 9 – FURNITURE AND SOFTGOODS
SLEEPING FACILITIES
FRONT BUNK
The front bunk is stowed near the cab ceiling
as shown in the following photo.
To lower bunk for use
1. Recline both the driver and passenger cab
seats completely to allow clearance for bunk
to be lowered and used.
2. To lower bed, lift up on the bunk handle while
releasing the storage hooks on each side of the
bunk and lower into position.
This low bunk design may be accessed
without the use of a ladder. If needed, a multi-
purpose step stool may be used.
WARNING
Sleeping facilities are not intended for
use while vehicle is in motion. For safety,
passengers must use safety belted
seating positions while vehicle is in
motion.
Seat Back
Release Lever
Seat Back Release Lever
(Located on the side of cab seats)
• Lift Seat Back Release Lever UP while
reclining seat back completely.
Bunk Storage Hooks
(Located in each side of the bunk)
Engaged
Disengaged
