DVD HOME THEATER
SYSTEM
–If Equipped
The available DVD home theater
system operates from 120-volt AC
household current only, so you must
have either the shoreline connected, the
generator running, or the inverter turned
on (if equipped).
The TV is connected to the Home
Theater System which plays through
theater speakers in the lounge area of the
coach.
Connect Theater Speakers
•
Press the
Speaker switch
(in video
cabinet) to TV
position to
connect the theater speakers to the
Home Theater system.
NOTE:The Aux. Battery Disconnect
switch must also be on while
listening to Theater Sound
because the audio relay is
powered by house batteries. If
the Aux Batt switch is off, the
speakers will not emit any
sound.
Set TV Video Input
•
Turn On both
TV and DVD
player
•
Press TV/
VIDEO or
INPUT button
on the remote or
front of TV and
select “Video 1”
input on the TV.
The TV screen will display the DVD
player logo when the correct input is
selected.
Play DVD with Theater Sound
•
Insert DVD into player. DVD will
begin to ‘load’ automatically. TV
screen will typically show
“READING” or “LOADING.”
•
The DVD may load directly
to the main title/menu screen
or it may begin to play
previews. You may be able to
skip previews if desired by pressing
the ‘Next’ button until you see the
main menu screen.
•
When the main
menu screen
appears, use the
arrow buttons on
the remote to
select the desired
entry or press the
ENTER or PLAY buttons on the
remote (or ‘Play’ button on DVD
player) to begin playing the feature.
•
Volume is adjusted with the DVD
remote (or volume control on DVD
player).
TV Sound through Theater
Speakers
When watching TV programs alone,
the TV normally plays sound through its
own built-in stereo speakers. If you wish
to connect TV stereo sound output to the
home theater speakers for a richer sound
quality, follow these steps:
•
Press the Speaker switch (in video
cabinet) to TV position.
•
Turn the TV and DVD player On.
•
Select the TV channel you wish to
watch.
•
Press FUNCTION button on DVD
player or remote to set DVD player to
“AV IN.”
•
Use the TV Menu button to set TV
audio output to ‘Variable Audio
Output.’ (See TV owner’s manual
for instructions.) This will route TV
stereo sound output through the
home theater system.
•
Select TV channels and adjust
theater speaker volume with remote
for either the TV or DVD.
Continued—
