![background image](http://html1.mh-extra.com/html/winnebago/impulse-24v/impulse-24v_user-manual_987488111.webp)
9-9
SECTION 9 –
FURNITURE AND SOFTGOODS
5. Install seat back cushion (stored beneath front
dinette cushion).
6. Remove dinette table and pedestal leg from
rear wardrobe cabinet.
7. Insert dinette pedestal leg into metal receiver
in the floor.
NOTE: Slideout must be extended to access the
metal receiver.
8. Place dinette table onto the pedestal leg,
ensuring the receiver on the bottom of the
table is fully seated on the pedestal leg.
NOTE: The driver seat may be rotated for
additional dinette seating. Refer to the
chassis manual provided in your
InfoCase for further information.
9. Reverse steps to store dinette.
MURPHY BED
(Typical View – Your coach may differ in
appearance)
Murphy Bed
1. Lift bed support legs upward until it locks into
position.
Seat Back Cushion
Storage Location
NOTICE
Stow furniture extension before retracting
slide rooms.
WARNING
Keep people away from operating
mechanism and pinch hazard areas
during use. Failure to do so could cause
injury.