SECTION 4
APPLIANCES & SYSTEMS
4-14
Filter Locations
Models 40FD & 40KD
Beneath Washer/Dryer Cabinet
Remove grate on front of cabinet as shown to
access filter.
Filter must be installed with airflow markings
(arrows) pointing downward.
NOTE:Do not block the filter in any way, such as
by setting packages or newspapers, etc.
in front of the return air grill on the front
of the cabinet. There must be free air flow
for the air conditioner to operate effi-
ciently.
Model 40TD
Beneath Floor Panel in Wardrobe
Remove floor panel from wardrobe as shown
to access filter.
Filter must be installed with airflow markings
(arrows) pointing downward.
NOTE:Do not block the filter in any way, such as
by setting packages or newspapers, etc.
in front of the return air grate. There
must be free air flow for the air condi-
tioner to operate efficiently.
WASHER/ DRYER
–If Equipped
For complete operating instructions, see the
manufacturer’s information provided in your
InfoCase.
To Open the Door During a Wash Cycle:
Follow these steps if you need to open the
door to your washer-dryer after a cycle has
already begun.
1. Advance the Program Selector to 'Reset' and
wait 5 seconds.
2. Advance the Program Selector to 'Drain' (8
o'clock') and allow the machine to drain
completely.
3. Advance the Program selector to 'Reset' (the
'Status/Door Lock' LED will blink quickly to
indicate that the cycle has stopped, but the
door is STILL LOCKED)
4. When the 'Status/Door Lock' LED blinks
SLOWLY (takes 1-2 minutes), you can open
the door.
A/C Filter Size: 14” x 20” x 1”
A/C Filter Size: 14” x 20” x 1”
AC/Furnace Filter
under wardrobe
floor panel
