![background image](http://html1.mh-extra.com/html/winnebago/grandtour-2017/grandtour-2017_operators-manual_987485186.webp)
SECTION 12 –
MISCELLANEOUS
12-6
Remote Operation
•
POWER:
The POWER button supplies
power to all the functions of the fireplace.
•
HEATER:
Turns the heater function ON and
OFF. The thermostat is adjustable by 2°F
increments. The button on the remote only
turns the heater on/off to the thermostat
setting selected with the control panel.
•
SPECTRAFIRE COLOR:
Press to cycle
through the (5) flame effects: Spectrafire,
Sapphire, Amethyst, Campfire, and Midnight
Fire. You can also select Auto Cycle to fade in
and fade out a new color flame effect
periodically.
•
SPECTRAFIRE INTENSITY:
This feature
is only adjustable from the remote control.
Each flame color has (5) intensity options
available.
•
SPECTRAFIRE SPEED:
This feature is
only adjustable from the remote control. Each
flame color has speed options available.
Setting 1 is slowest ranging up to setting 5
which is the fastest.
•
TIMER:
Press the TIMER button to cycle
through the (10) timer settings (30 minutes, 1
Hour to 9 Hours) and the OFF setting.
Further Information
Refer to the Fireplace user guide provided in
your InfoCase for complete operating and
maintenance instructions, as well as safety
precautions.
FIREPLACE
–If Equipped
NOTE: The fireplace can be operated by either
the remote control or the control panel.
Remote Operation
•
POWER:
The POWER button supplies
power to all the functions of the fireplace. The
POWER button will put the insert in standby
mode. This will turn off all functions at once
but will hold the settings in the memory. By
pressing the POWER button again the unit
will turn on at the same settings.
• Power
• Spectrafire
Speed
• Heater
Fireplace Remote Control
(Located inside InfoCase)
• Timer
• Spectrafire
Color
• Spectrafire
Intensity
-Typical View
• Power
• Flame
• Heater
Fireplace Remote Control
(Located inside InfoCase)
• Timer
• Sidelights
• Uplights