![background image](http://html1.mh-extra.com/html/winnebago/grandtour-2017/grandtour-2017_operators-manual_987485124.webp)
SECTION 8 –
ENTERTAINMENT
8-4
•
Turn “ON” the TV and Sound Bar.
•
Select the TV channel you wish to watch.
•
Press the “Source” button on the Sound Bar
remote until the display reads “D.IN”.
•
Turn Sound Bar volume up or down.
Listen to Music stored on a
Bluetooth device
•
Press the “Source” button on the top panel of
the Sound Bar or on the Sound Bar remote
until display reads “BT”.
•
On your Bluetooth device, perform the
pairing operation. A list of devices found will
appear on your device. Select the Sound Bar.
•
Enter the PIN code 0000 (if required).
•
When the devices are paired, the Sound Bar
will display the device name.
•
Turn the Sound Bar volume up or down.
Lounge TV with Sound Bar System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Bedroom TV with Sound Bar
System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Exterior TV with Sound Bar System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Turning TV Speakers On/Off
TV speakers can be turned off to prevent an
echo effect when using an external speaker
(sound bar). Every TV is slightly different, refer
to the TV manufacturer’s user guide provided in
your InfoCase for detailed instructions on turning
TV speakers off.
Further Information
See the manufacturer’s user guide provided in
your InfoCase for complete feature descriptions
and operating instructions.
BOSE
®
SOUND BAR SYSTEM
–If Equipped
The Sound Bar System operates from 120-volt
AC household current only, so you must have
either the shoreline connected, the generator
running, or the inverter turned on (if equipped).
The TV is connected to the Sound Bar.
Lounge TV with
Sound Bar System
To calibrate Sound Bar
(if not previously calibrated)
NOTE: You will only need to calibrate your
system one time.
1. Turn “ON” the TV and Sound Bar.
2. Place the ADAPTiQ headset on your head
making sure the left and right sensors rest
above your ears.
3. Connect the ADAPTiQ headset into the port
located on the back of the sound bar.
4. Press the sound touch button on the remote
control. Then press and hold “8” on the remote
control until the TV indicator and bluetooth
indicator illuminate green.
5. Follow the on-screen instructions given to
you by the system.
6. When calibration is complete, remove the
ADAPTiQ headset.