11-5
SECTION 11 –
MAINTENANCE AND STORAGE
of a graphic can be removed with cotton
swabs after softening it with isopropyl
alcohol. Rinse area thoroughly after cleaning.
FRONT END MASKS AND
PAINT DAMAGE
NOTE: This information is to make you aware of
a potential paint failure that could occur
when moisture is trapped between front
end masks and painted surfaces.
If you choose to install an aftermarket
protective front end mask, please follow these
preventive guidelines:
•
The front end mask must be removed if the
vehicle sits longer than 5 days without being
driven.
•
The front end mask must be thoroughly dry
before storing or reinstalling on the front of
the vehicle.
•
When reinstalling the mask, ensure both the
mask and the painted surface are free of debris
to avoid damage by abrasion.
•
Failure to follow recommendations will void
any paint warranty.
PLASTIC PARTS – CLEANING
Many parts in your vehicle, such as the dash,
exterior light lenses, and certain exterior body
panels are made of high-impact plastic materials
that can be damaged by wiping with solvents or
improper cleaning products.
Always try cleaning plastic parts with the
mildest cleaners first and work your way up to
stronger cleaning products. Use the following
cautionary lists as a guide when selecting
cleaning products to use on plastic parts.
Here is a list of mild cleaners that
may be used
safely
:
•
Car washing soap and water
•
Glass cleaners
without
ammonia
•
Mineral oil
•
Multipurpose cleaners (such as Fantastik
®
,
Formula 409
®
, etc.)
The following products, compounds, or solvents
must be
wiped off immediately
to avoid
damage:
•
Ammonia
•
Brake fluid
•
Bathroom basin, tub, and tile cleaners
•
Chlorine
•
Ethyl alcohol
•
Isopropyl (rubbing) alcohol
•
Kerosene or gasoline
•
Naphthalene
•
Pine-type household cleaners
Do not use
cleaners containing the following
products, compounds, or solvents. These
products
will damage
the finish.
•
Acetic acid
•
Acetone (nail polish remover)
•
Aromatic solvents (lacquer thinners)
•
Benzene
•
Butyl alcohol
NOTICE
Do not use citrus-based cleaners on
polycarbonate finishes. Citric compounds
will damage the high-gloss surface,
causing it to appear dull or “flat”. Always
test a cleaning product on a hidden area
to be sure it will not cause damage to the
appearance of the part.
