SOUND BAR AND CD/
DVD PLAYER
The Sound Bar and CD/DVD player
operates from 120-volt AC household
current only, so you must have either the
shoreline connected, the generator running,
or the inverter turned on (if equipped). The
TV is connected to the Sound Bar and CD/
DVD player.
To Watch a DVD
•
Turn ON the TV, Sound Bar, and DVD
player.
•
Set TV Input to HDMI3 by using the TV
Remote or the Controls on the TV.
•
Insert DVD into player. DVD will begin
to load automatically. DVD player
screen will typically show
“LOADING”.
•
The DVD may
load directly to
the main title/
menu screen or it
may begin to
play previews.
You may be able to skip previews if
desired by pressing the chapter
“advance” button until you see the main
menu screen.
•
When the main menu screen appears,
use the arrow buttons on the DVD player
remote to select the desired entry or
press the “+” or PLAY buttons on the
DVD player remote (or “Play” button on
DVD player) to begin playing the
feature.
•
Volume is adjusted with the DVD player
remote or TV remote.
TV Sound through the Sound Bar
When watching TV programs
(broadcast, cable, or satellite), the TV
normally plays sound through its own built-
in stereo speakers. To connect TV sound
output to sound bar speakers for a richer
sound quality, follow these steps:
•
Turn the TV and Sound Bar ON.
•
Select the TV channel you wish to
watch.
•
Set Sound Bar Source to “RCA 3” by
using the front panel of the Sound Bar or
the Sound Bar Remote until audio is
heard.
•
Turn TV and/or Sound Bar volume up or
down.
Turning TV Speakers On/Off
•
Press MENU button on the TV remote.
•
Select AUDIO option.
•
Toggle to TV Speakers to turn speakers
on or off.
Further Information
See the manufacturer’s user guide
provided in your InfoCase for complete
feature descriptions and operating
instructions.
• On the DVD player
Remote, press the “+”
or PLAY button.
• On the DVD player,
press the PLAY
button.
• On the Sound Bar, press the
source button.
• On the Sound Bar
Remote, press the
source button.
