9-1
5 - DA
S
H
/
A
U
T
O
SECTION 9 – FURNITURE AND SOFTGOODS
SLEEPING FACILITIES
DINETTE/BED CONVERSION
–If Equipped
Dinette to Bed
1. Remove dinette cushions and set aside.
2. Insert your finger in the hole and lift the bed
support upward.
3. Lift the bed extension upward and lower to the
floor.
4. Arrange dinette cushions into place over the
table to complete the bed conversion..
Reverse steps to reassemble to dinette
configuration.
BED – DELUXE SLEEP SYSTEM
(Model 70BL)
(Typical View – Your motorhome may
differ in appearance)
Bed Conversion
1. Slide driver side bed frame toward passenger
side bed frame.
WARNING
Sleeping facilities are not intended for use
while vehicle is in motion. For safety,
passengers must use safety belted
seating positions while vehicle is in
motion.
