![background image](http://html1.mh-extra.com/html/winnebago/adventurer-27n/adventurer-27n_manual_987464032.webp)
SECTION 3 -
DRIVING YOUR MOTORHOME
3-6
•
Reverse step to store passenger workstation.
MIRRORS – POWER ELECTRIC
–If Equipped
Always adjust mirrors for maximum rear
visibility before driving off. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
Mirror Adjustment Control
The mirror control is located on the driver side
armrest panel or the dash. The ignition key must
be on to adjust the mirrors.
Mirror Heaters
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. A switch for the
mirror heaters is located on the dash. To turn on,
press the switch UP. Press DOWN to turn off.
Mirror Arm/Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
Move Selector Switch L or R to select mirror.
Center “neutral” position disables arrows
to avoid unintentionally moving a mirror.
Press Arrow Buttons to move
mirror surface in direction indicated.
Mirror Heat Switch
(Located on driver side trim panel)
-Typical View
Mirror Head Pivot Lock
• Loosen Allen head set
screws to pivot mirror head.
• Torque 75-100 in./lbs.