![background image](http://html1.mh-extra.com/html/winnebago/2010-navion-iq/2010-navion-iq_operators-manual_987448079.webp)
8-3
SECTION 8 –
ENTERTAINMENT
To connect or disconnect the exterior speaker
system with the interior stereo system, press
SPEAKER C (located on your interior DVD/CD/
MP3/AM-FM stereo radio) as shown in the
following photo.
Further Information
See the stereo radio information provided in
your InfoCase for complete operating
instructions.
TV ANTENNA
The TV antenna on your motor home can be
easily raised, rotated a full 360
°
and lowered
from inside the vehicle by simply turning a crank
or directional handle. A built-in signal amplifier
designed to strengthen signals, is controlled by a
power switch built into the optional video
selector panel or on a wall plate assembly.
See the antenna manufacturer’s operation,
care and maintenance information in your
InfoCase.
Raising Antenna to Operating Position
Turn elevating crank clockwise in “UP”
direction until some resistance to turning is noted
(about 13 turns). Antenna is now in operating
position.
Turn amplifier power switch “ON” to receive TV
signal.
Rotating Antenna for Best Picture
Make sure antenna is in the “UP” position.
Pull down on directional handle using both hands
until it disengages ceiling plate and rotate for best
picture and sound on TV set.
Lowering Antenna to Travel Position
Rotate antenna until pointer on directional
handle aligns with pointer on ceiling plate.
Exterior Speaker
(Located below patio awning)
-Typical View
Exterior Speaker Switch
“Speaker C”
(Located on the interior DVD/CD/
MP3/AM-FM Stereo Radio)
WARNING
Never allow the antenna to touch
electrical power lines or any other
electrical wires.