3-11
SECTION 3 –
DRIVING YOUR MOTOR HOME
Further Information
See your chassis manual in your InfoCase for
more instructions, information, and precautions
on using this feature.
PEDAL ADJUSTMENT
The accelerator and brake pedals may be
adjusted forward or rearward for maximum
comfort and control using the button on the lower
left dash panel.
HAZARD WARNING FLASHERS
The hazard warning flashers provide
additional safety when the vehicle must be
stopped on the side of the roadway and presents a
possible hazard to other motorists. When the
flashers are on, it serves as a warning to other
drivers.
NOTE: Move multi-function lever up or down to
cancel.
Further Information
See the chassis manual in your InfoCase for
instructions on activating, operating, and
canceling hazard warning flashers.
WARNING
Do not activate the engine brake system
while on icy or extremely wet roads or in
any other situation where abrupt
deceleration could cause skidding or loss
of vehicle control.
Engine Brake Operation
•
Low – Press for normal braking
on level or
shallow grades and in-town and city driving.
This shuts down three of the six cylinders when
engaged and provides about 130-hp of braking
power. The switch indicator light will be on.
•
High – Press for additional braking on steep
grades
and mountain driving. This shuts down
all six cylinders when engaged and provides
about 300-hp of braking power. The switch
indicator light will be on.
•
The middle position is Off.
The engine brake
is deactivated. Only the chassis air brakes are
active at this setting. The switch indicator light
will be off.
