SECTION 3 –
DRIVING YOUR MOTOR HOME
3-6
Further Information
Please read the Keyless Entry System
information in your InfoCase for information on
features and instructions on how to program your
personal entry code.
MIRRORS – POWER ELECTRIC
Always adjust mirrors for maximum rear
visibility before driving. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
Mirror Adjustment Control
The mirror control is located on the driver side
armrest panel or the dash. The ignition key must
be on to adjust the mirrors.
Mirror Heaters
The mirrors may also contain heating
elements to defog or de-ice the mirror glass
during cold weather operation. An ON-OFF
switch for the mirror heaters is located near the
remote mirror controls.
Mirror Arm/Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by repositioning the mirror arm and/
or rotating the mirror head.
Keyless Entry Touchpad
Move Selector Switch L or R to select mirror.
Center “neutral” position disables arrows
to avoid unintentionally moving a mirror
Press Arrow Buttons to move
mirror surface in direction indicated
Unscrew protective cap and
loosen Allen head set screw
to pivot mirror head
Mirror Head Pivot Lock
