![background image](http://html1.mh-extra.com/html/winnebago/2009-ellipse/2009-ellipse_user-manual_987445123.webp)
9-3
SECTION 9 –
FURNITURE AND SOFTGOODS
2. Remove the table from the wall support
bracket by lifting the end of the table. Then
lower the table to rest on the cleats attached to
each dinette bench.
3. Arrange dinette cushions to cover bed area.
Bed to Dinette
1. Reattach the table onto the wall support and
lower the table leg.
2. Make sure that the table leg is secured into the
floor support bracket and the leg brace is
locked.
BOOTH DINETTE - 40WD
MODELS
–If Equipped
(Typical view – your coach may differ)
Table
Bracket
Wall
Support