2.6 Connector Description
2.6.1 VGA Connector
The 32” PT Series 4K UHD LCD Monitor uses standard 15pin D-sub connector. Plug 15-pin
VGA signal cable to the VGA connector in the rear of the motherboard, and plug the other end
to the monitor. Secure cable connectors with hexagonal copper pillars M3x4mm.
The pin assignment and signal names for VGA connector
2.6.2 HDMI Connector
The 32” PT Series 4K UHD LCD Monitor uses standard HDMI connector. Plug HDMI signal
cable to the HDMI connector on the rear side of the PC system and plug the other end to the
monitor.
The pin assignment and signal names for HDMI connector
2.6.3 USB for Touch
The 32” PT Series 4K UHD LCD Monitor uses a USB port for touch capabilities. Use USB
cable to connect Display to touch.
The pin assignment and signal name ofa USB port for touch
Pin №
Signal Name
Pin №
Signal Name
1
RED.
2
GREEN
3
BLUE
4
NC
5
GND
6
AGND
7
AGND
8
AGND
9
VGA_5V
10
GND
11
NC
12
DDCSDA
13
H Sync
14
V Sync
15
DDCSCL
Pin №
Signal Name
Pin №
Signal Name
1
H
2
GND
3
HDMI_RX2-
4
H
5
GND
6
HDMI_RX1-
7
H
8
GND
9
HDMI_RX0-
10
H
11
GND
12
HDMI_RXC-
13
HDMI_CON_CEC
14
NC
15
HDMI_CON_SCL
16
HDMI_CON_SDA
17
GND
18
+5V_HDMI
19
HDMI_CON_HP
Pin No.
Signal Name Pin No.
Signal Name
1
+5V
2
Data-
3
Data+
4
GND
