USER MANUAL
CHAPTER 2
INSTALLATION
- 17 -
2.2 Mounting Guide
The Rack Mount Display can be applied for several different installation methods, including
panel mounting, bracket mounting, VESA mounting. Refer to sub-sections below for more
details.
CAUTION/ ATTENTION
Follow mounting instructions and use recommended mounting
hardware to avoid the risk of injury.
Suivez les instructions de montage et d'utilisation recommandé le
matériel de montage pour éviter le risque de blessure.
2.2.1 Rack Mounting
The Rack Mount Display comes with clamp mounts that enable you to install the unit onto a
wall (where space has been cut out to accommodate the rest of the hardware). Winmate
provides VESA and Wall Mount Kits by request.
Installation Instruction
1. Make a cutout on the fixture (ex. wall) according to the cutout dimensions of the
display.
2. Based on the drawing, mark screw holes on a front side of the fixture. Place display
on the fixture from the rear side. Use electric screwdriver to fasten M3 screws from
the front side.
3. You complete the installation. Please connect all the peripherals if needed.
