Winmate R15IK3S-POC3, User Manual

Page: 19 / 76

19
Chapter 3: Getting Started
3.3 Connecting Power
This section provides information on how to use connectors on the P-Cap Open Frame Panel PC.
Notice that connectors are located on the top rear side of the device. Be cautious while working
with these modules. Please carefully read the content of this chapter in order to avoid any
damages.
Installation instruction:
1. Connect the Panel PC to a power jack.
2. Connect the other side of the thermal block to the AC adapter.
3. Connect the AC adapter to the power cord.
4. Plug in the power cord to a working AC wall outlet. The device will boot automatically.
CAUTION
Use only the AC adapter included in your package
(Rating: Output 4.2 A). Using other AC adapters may damage the device.
ALTERNATING CURRENT
This product must be grounded. Use only a grounded AC outlet. Install
the additional PE ground wire if the local installation regulations require
it.