21
Chapter 3: Getting Started
3.3 Connecting Power
This section provides information on how to use connectors on the P-Cap Open Frame Panel
PC. Notice that connectors are located on the top rear side of the device. Be cautious while
working with these modules. Please carefully read the content of this chapter in order to avoid
any damages.
Caution
Use only the AC adapter included in your package . Using other
AC adapters may damage the device.
Utilisez uniquement l'adaptateur secteur inclus dans votre colis.
Attention
L'utilisation d'autres adaptateurs secteur peut endommager
l'appareil.
Installation instruction:
1. Connect the AC Adapter to the 4-pin power jack connector of a panel PC.
2. Connect the AC adapter to the power cord.
3. Plug in the power cord to a working AC wall outlet.
4. Press the Power button located on the rear side of the panel PC to start the system.
Alternating Currrent !
This product must be grounded. Use only a
grounded AC outlet. Install the additional PE ground wire if the local
installation regulations require it.
Mise à le Terre!
Ce produit doit être mis à la terre. Utilisez uniquement
une prise secteur mise à la terre. Installez le fil de terre PE supplémentaire
si les réglementations d'installation locales l'exigent.
