User Manual
Chapter 6
Mounting
79
6.2 Safety Precautions
Observe the following common safety precautions before installing any electronic
device:
• Use separate, non-intersecting paths to route power and networking wires. If
power wiring and device wiring paths must be crossed make sure the wires are
perpendicular at the intersection point.
• Keep the wires separated according to the interface. Wires that share similar
electrical characteristics must be bundled together.
• Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices in the
system.
6.3 Mounting Guide
The IP69K Stainless P-CAP Panel PC comes with different mounting options suitable
for most of the industrial applications. The main mounting approach is chassis - very
user-friendly in terms of installation. Refer to sub-sections below for more details.
