User Manual
Chapter 4
AMI UEFI BIOS Setup
67
4.3 Using Recovery Wizard to Restore Computer
The Panel PC has a dedicate recovery partition stored on the hard drive of the
PC to enable quick one-key recovery process. This partition occupies about
11GB of the storage space, and comes built-in to the PC.
NOTE:
Before starting the recovery process, make sure to backup all
user data. The data will be lost after the recovery process.
To enable quick one-key recovery procedure:
Plug-in the AC adapter to Bay Trail series computer. Make sure the computer
stays plugged in to power source during the recovery process.
Turn on the computer, and when the boot screen shows up, press the
F6
to
initiate the Recovery Wizard.
The following screen shows the Recovery Wizard. Click
Recovery
button to
continue.
A warning message about data loss will show up. Make sure the data is backed up
before recovery, and click
Yes
to continue.
