Winmate IP70 User Manual Download Page 57

Page: 57 / 88

Chapter 3: Insyde H20 BIOS Setup

3.3 Using Recovery Wizard to Restore Computer

Note:

Before starting the recovery process, make sure to backup all user data. The

data will be lost after the recovery process.

To enable quick one-key recovery procedure:

1. Connect the computer to the power source. Make sure the computer stays plugged in to power

source during the recovery process.

2. Turn on the computer, and when the boot screen shows up, press

to initiate the Recovery

Wizard.

3. The following screen shows the Recovery Wizard. Click

Recovery

button to continue.

4. A warning message about data loss will show up. Make sure the data is backed up before

recovery, and click

Yes

to continue.

5. Wait the recovery process to complete. During the recovery process, a command prompt will show

up to indicate the percent of recovery process complete. The system will restart automatically after

recovery completed.

Important:

Before starting the recovery process, remove any expansion card.

Summary of Contents for IP70
























































































Search results

Summary of Contents for IP70

Reviews:

Brands by name

Popular brands

Winmate IP70, User Manual

Search results

Summary of Contents for IP70

Reviews:

Brands by name

Popular brands