User Manual
Chapter 5
Driver Installation
G-WIN Vehicle Mount Panel PC
51
5.2 The Premier Touch Driver Installation
Touch-Kit is the Premier Touch software, which contains drivers of the touch panel
controllers for the specified communication connectors, RS232, PS/2 and USB, and the
other two utilities.
The two utilities are as follows:
Touch Tray support
This is utility for emulating the right and left button of mouse through controlling
touch panel. Users can toggle between right/left mouse buttons by this utility.
Configuration support
The calibration and draw test of touch panel can be done by this utility. Besides,
you can add or remove for new RS-232 or PS/2 touch panel devices.
5.2.1 Installing Touch Kit
Follow the steps below to install Touch Kit:
Step 1
Insert the Touch-Kit CD to CD-ROM.
Step 2
Open the G-WIN Vehicle Mount Panel PC User Manual CD to “Touch _PM”
directory.
Step 3
Double-click the Setup.exe, then Windows starts to run the installation program.
IMPORTANT:
Do not plug the USB controller on the system before the installation has
been finished.
Step 4
Click Next to continue installation. The system will automatically detect touch
devices connected to the COM2 port on your Panel PC.
