9
English
ZERO
INITIAL OPERATION
①
Insert the power cord into an electrical
outlet.
②
Press the ‘Power’ button.
소피아 1
Note
ˍ
During the first 30 seconds of power up, the Air Quality
Indicator will cycle through Blue, Yellow and Red colors.
The Particle Sensors take approximately 30 seconds to
gauge the air quality in the environment, after which normal
operation will begin.
③
By default, when the unit first powers on, the
mode will be set to Auto with PlasmaWave
®
enabled.
ˍ
When in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
ˍ
PlasmaWave
®
works to remove harmful
airborne contaminants.
Note
ˍ
In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
ˍ
When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave
®
, it is normal and does not signify product
failure. To disable PlasmaWave
®
, see page 12.