Winix C535 User Manual Download Page 1

FRONT

PACKAGE CONTENTS

BACK

Air Outlet

Vent

Handle

Power Plug

Remote Control and User Manual will be located

on the top insert after the box is opened.

Control Panel

Front Panel

(1) Pre-Filter 

(4) Activated Carbon Filters 

(1) True HEPA Filter

Unit

User Manual

Remote

Control

MODEL PART DIAGRAM

10

11

14

15

12

13

09

02

03

04

05

06

07 08

01

01. Auto Indicator

Indicates whether Auto Mode is enabled or disabled.

02. Sleep Indicator

Indicates whether Sleep Mode is enabled or disabled.

03. PlasmaWave

®

 Indicator

Indicates whether PlasmaWave

® 

is enabled or disabled.

04. Fan Speed Indicator

Indicates the current fan speed.

05. Timer Indicator 

If timer has been set, the LED light indicates the set time 
of operation.

06. Filter Replacement Indicator

LED light indicates when it is time to change the filter.

07. Light Sensor

Detects the amount of ambient light in the environment.

08. Smart Sensor

Detects the amount of odorous gas in the environment. 
When in Auto mode, the fan speed adjusts according to 
the detected amount of gas.

09. Power Button 

Turns the unit on or off.
During the first 30 seconds of powering up, the Air Quality 
Indicator will cycle through Blue, Amber and Red colors. 
Smart Sensor takes approximately 4 minutes to detect the air 
quality in the environment before normal operation begins.

10. Mode Button

 

Press to cycle through to set the mode of operation (Auto, 
Sleep). The unit will default to Auto with PlasmaWave® 
enabled when first powered on.

 

Auto Mode

:

 - Auto Mode automatically adjusts fan speeds 

according to your indoor air quality. The fan speed 
will adjust to low when air quality is good, medium 
when fair, and to high when poor.

 

Sleep Mode

:

 - When Sleep Mode is activated, the Air Quality 

Indicator LED light is disabled.

 - Fan speed will automatically set to minimum speed 

(lower than 'Low') which will be nearly silent.

 - When Sleep Mode is active, PlasmaWave® will be 

disabled, but it can be turned back on.

11. PlasmaWave

®

 Button

Enables or disables PlasmaWave

®

.

"When the unit is running, you may hear a chirping or 
buzzing sound. The sound is from large particles passing 
through PlasmaWave

®

, it is normal and does not signify 

product failure."
Press the PlasmaWave

®

 button when the unit is on 

to enable or disable this feature.

12. Air Quality Indicator

Color coded LED light indicates one of three levels of  
Air Quality: Red (poor), Amber (fair), and Blue (good).

13. Fan Speed Button

Enables manual operation of the unit's fan speeds.

 • Press to cycle through and set the desired fan speed 

(Low, Medium, High, Turbo).

14. Timer Button

Press to cycle through and set desired length of operation 
(1hr, 4hr, 8hr, [NO TIMER]).

15. Filter Reset Button

After replacing the filter, turn on the unit and then use a 
thin object, such as a paper clip, to press the Filter Reset 
Button for 5 seconds.

CONTROL PANEL

INITIAL OPERATION

1.  Remove the front panel by grasping its upper 

edge and gently pulling forward.

2.  Remove the Pre-Filter, then the plastic bag of 

filters behind it.

3.  Remove filters from protective plastic bag.

4.  Install the filters until they fit securely in place.

03. True HEPA Filter (back) 
02. Activated Carbon Filter (middle) 
01. Pre-Filter (front)

5.  After filters are installed, close the front panel.

6.  Insert the power cord into an electrical outlet.

Latch

02

03

01

Latch

When to Replace Filters 

Filter

Indicator Light

When to Service

When to Replace

Pre-Filter

none

Clean once every 14 days

Permanent

Activated Carbon Filter 

none

Can NOT be WASHED

Replace every 3 months

True HEPA Filter

Lasts Approx.12 months

 • When the Check Filter Indicator LED is on, it is time to replace the True HEPA Filter and Activated Carbon Filter.
 • Intervals between filter replacement may vary depending on environment.

MAINTENANCE

CLEANING CARE

Cleaning the Filters:

Use a vacuum cleaner or soft brush to clean the Pre-Filter

 • If it is excessively soiled, rinse in room temperature water.
 • Do not use detergent or soap.
 • Allow the filter to dry for 24 hours or more before using.
 • Intervals between filter cleaning may vary depending on 

the air quality in the environment.

 • Do not use hot water over 104

o

F.

Cleaning the Exterior & Interior:

1.  Open the front panel and clean the interior with a 

vacuum cleaner.

 • A handheld vacuum or hose attachment will work best.

2.  Dampen a cloth with room temperature water and wipe 

down the interior and exterior of the unit. 

3.  Wipe the unit down with a clean, dry cloth.

 • Ensure no moisture remains before plugging the unit back in.

* For optimal performance, clean every 1 - 2 months. 

  N O T I C E

 • When cleaning the unit, always unplug the power cord first and then wait until the unit has cooled down.
 • Never disassemble, repair, or modify the unit yourself.
 • Do not use flammable sprays or liquid detergents.
 • Do not allow children to clean or maintain the unit.
 • Before cleaning or maintaining, ensure unit is unplugged.
 • Do not use benzene, alcohol, or other volatile fluids, which may cause damage or discoloration.

REMOTE CONTROL

Operates in a 20 foot radius:

A

C

B

D

 

(A) Power

: Turns the unit on or off.

 

(B) Auto

: Enables Auto Mode.

 

(C) Fan Speed

: Enables manual 

operation of the fan speeds.

 

(D) Turbo

: Enters Manual Mode 

and directly sets the fan speed 
to Turbo.

How to replace your remote’s battery:

 

 

1. Flip over your remote and open

battery tray.

1.A

: Pinch the lever in while,

1.B

: Pulling the battery tray out.

 

 

 

 

2. Insert battery into the battery

tray as shown.

2.A

: Make sure the polarities [+]

[-] match when placing in the tray.

 

 

3. Close the battery tray.

3.A

: Reinsert battery tray into 

remote until you hear a "click" 

sound.

1.A

1.B

2.A

3.A

  

Keep all used batteries (CR2025) in safe place.

REPLACING FILTERS

Resetting Filter Life: 

After replacing your True HEPA Filter, place the 

Pre-Filter back in and close the Front Panel. While 

the unit is on, hold the Filter Reset Button for at 

least 5 seconds until you hear the beep. After 

the beep, the Filter Replacement Indicator will 

disappear. Your Winix True HEPA is now reset.

  W A R N I N G

 

Incorrect battery usage may cause battery fluid 
leakage and/or damage.

 

When not using remote for extended periods of time, 
remove the battery.

 

Avoid dropping or damaging the remote.

 

WARNING: Chemical Burn Hazard. Keep batteries 
away from children.

 

This product contains a lithium button/coin cell 
battery. If a new or used lithium button/coin cell 
battery is swallowed or enters the body, it can cause 
severe internal burns and can lead to death in as little 
as 2 hours.

 

Always completely secure the battery compartment.

 

If the battery compartment does not close securely, 
stop using the product, remove the batteries, and 
keep it away from children.

 

If you think batteries might have been swallowed or 
placed inside any part of the body, seek immediate 
medical attention.

 

The batteries should be disposed of properly, 
including keeping them away from children. Even 
used batteries may cause injury.

WHERE TO USE

12~18 in

12~18 in

Allow 12 ~ 18 in. of space between TVs, radios, and other 
electronics

Electromagnetic interference from certain electronics may 
cause product malfunction.

Place indoors away from direct sunlight

Direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

Flimsy or slanted surfaces may result in abnormal noise and 
vibrations.

Allow at least 12~18 in. from walls for maximum air flow

True HEPA Filter

02

Activated Carbon Filter

01

PlasmaWave

®

03

3-STAGE AIR PURIFICATION

Air Purification means it 

removes inanimate particles

Reviews: