WinGD X92-B, Operation Manual

Page: 74 / 460

4.4 System oil system
The system oil system supplies the items that follow with system oil:
•
Bearings
•
Gear wheels
• Vibration dampers
•
Pistons
•
Crosshead assemblies
•
iELBA (optional)
•
Other running parts
• Servo oil system.
For the schematic diagrams, refer to section 13.1 Schematic diagrams - general .
The system oil system has the engine connections as interface to the plant as follows (in Figure
4-4 marked with a circle):
•
Connection 22 (oil drain bedplate horizontal) (if applicable)
•
Connection 23 (oil drain bedplate vertical)
•
Connection 25 (main oil inlet)
•
Connection 26 (lubricating oil turbocharger inlet) (optional)
• Connection 27 (lubricating oil turbocharger outlet)
•
Connection 30 (lubricating oil crosshead inlet) (optional)
•
Connection 37 (leakage oil gland box outlet).
System oil from the bearings and gear wheels drops into the crankcase.
The system oil system has the parts that follow:
•
Oil pipes
The oil pipes connect the items that use oil.
•
Lever
The levers (010) in the crankcase supply the oil to the crosshead.
•
Oil sample valve
Use the oil sample valve (009) to get a sample of the supplied oil.
X92-B
AA00-0000-00AAA-043B-A
Operation Manual System oil system
Winterthur Gas & Diesel Ltd.
- 74 - Issue 002 2021-11