Marine Installation Manual
2021-08
5-1
5 Engine Automation
5.1 DENIS
X72DF
5
Engine Automation
The Engine Control System (ECS) provides data bus connection to the Propul
-
sion Control System (PCS) and the Alarm and Monitoring System (AMS). The
AMS is usually provided by the shipyard.
The leading suppliers of propulsion control systems approved by WinGD ensure
complete adaptation to engine requirements.
Figure 5
-
1 Engine automation architecture
5.1
DENIS
WinGD’s standard electrical interface is
DENIS
, which is in line with approved
propulsion control systems.
DENIS
The
D
iesel
E
ngine Co
N
trol and opt
I
mising
S
pecification (DENIS)
interface contains specifications for the engine management of all
WinGD two-stroke marine diesel engines.
ECS
WinGD provides a fully integrated ECS, which takes care of all
Flex system-specific control functions, e.g. fuel injection, exhaust
valve control, cylinder lubrication, crank angle measurement, and
speed/load control. The system uses modern bus technologies for
safe transmission of sensor- and other signals.
SM-0261
GVU
or
iGPR
Propulsion Control System
FGSS
Engine Control System
(ECS)
Remote Control
System
Engine Safety
System
Alarm and Monitoring
System
DENIS
specification
