![WinGD X72-B Operation Manual Download Page 277](http://html1.mh-extra.com/html/wingd/x72-b/x72-b_operation-manual_986578277.webp)
Tab 6-21
FUEL / LUBRICATION SYSTEM
Item
Function
Effect
002
Cylinder Lubrication Oil Type indi-
cation
Shows the type of cylinder lubrication oil in use
Shows: Low BN, High BN
003
Cylinder Lubrication Mode indica-
tion
Shows the status of the cylinder lubrication
Shows: Dry Running, Pre-Lubrication, Speed Dependent, Load
Dependent, Manual Lubrication, Stopped
004
Used Fuel Type indication
Shows the fuel in use
Shows: HFO, LFO, GAS, LFO & GAS, HFO & GAS
005
LOW BN button
Changes to low BN cylinder oil
006
LFO button
Changes to LFO (Light Fuel Oil)
007
HIGH BN button
Changes to high BN cylinder oil
008
HFO button
Changes to HFO (Heavy Fuel Oil)
009
AUX SO PUMP START/STOP
Starts and stops the auxiliary electric servo oil pump (servo oil
service pump)
NOTE:
If necessary, start this pump only in engine stop mode.
010
MANUAL LUBRICATION button
Starts the manual cylinder lubrication procedure related to the
set values
011
Manual Lubrication Cylinder but-
tons
Manually select the cylinder for manual lubrication:
•
Set 1 to n for the related cylinder
•
Set 0 (zero) for all cylinders
012
Manual Lubrication Pulses buttons Manually set the number of injections for lubrication at engine
stop mode (range 0 to 255)
X72-B
AA00-4618-08AAA-043B-A
Operation Manual
MCP page - FUEL / LUBRICATION SYSTEM
Winterthur Gas & Diesel Ltd.
- 277 -
Issue 003 2021-12