WinGD WARTSILA RT-flex58T-E, Maintenance Manual

Page: 211 / 504

Maintenance
3140 − 1/A1
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
1/ 4
Tools: Key to Illustrations:
1 Manual ratchet (WLL 2500 kg) 94016E 1 Upper part of cylinder 12 Orifice
2 RUD-eye bolts M16 94040-M16 2 Lower part of cylinder 13 Oil inlet pipe
1 Support 94320 3 Bolt M20x150 14 Main bearing cover
1 Wire rope sling GF 94333D 4 Bolt M24x200 15 Crankshaft
5 Bolt M20x480 16 Main bearing shell
6 2-part gasket 17 Oil drain pipe
7 2-part gasket 18 Upper casing
8 Tension spring 19 Screw M16x160
9 Tension spring 20 Piping for damper
10 Housing monitoring
11 Taper pin
1. Dismantling
When the 2-part gaskets 6 or 7 has to be removed from an axial damper, proceed
as follows:
⇒ Switch off the bearing oil pump.
⇒ Remove oil drain pipe 17.
⇒
Unscrew and remove oil inlet pipes 13 and the piping for damper monitoring
20 internally and externally from upper casing 18.
⇒ Remove upper casing 18.
A
18
20
003.262/00
13
17
V2 / 2013
Axial Damper
Dismantling and Assembling