Wine Guardian D025, Installation, Operation And Maintenance Manual

Page: 40 / 96

34
Installation
安装
警示
SHARP EDGES
RISK OF SERIOUS INJURY
边缘尖锐，严重伤害风险
Sharp edges are present inside the Wine Guardian system.
酒卫系统中有尖锐的边缘。
Pre-installation Test
安装前的测试
Test the system before installing it to check for non-visible shipping damage.
在安装前测试，检查系统是否有不可见的运输损坏。
To test the system:
测试系统：
✓
Set the system on the floor or a sturdy level surface.
将设备放在坚固
,
水平的地
面。
✓
Plug in the system.
插入电源。
✓
Press the on/off switch, control illuminates. This indicates the system has
power.
按
ON / OFF
开关，控制灯亮起。这表明该系统已通电。
✓
The built in timer prevents short cycling and keeps the system from
turning on right away. The system comes on and runs as long as the temperature of
the space is above the thermostat set point. After several minutes, cold air comes out
of the system from the evaporator section side and hot air comes from the condenser
section. Listen for any unusual noise or vibration.
内置定时器防止短期循环，从而马上启动系统。只要空间温度高于温控器设定值，系统
就开始运转。几分钟后，冷空气从蒸发段出来，热空气从冷凝端出来。聆听任何不寻常
的噪音或振动。