Wincor Nixdorf TH200 Programmer'S Manual Download

Page: 24 / 106

Programmer’s Guide

TH200

ESC ? n

Cancel user-defined characters

Code:

Range:

Description:

Notes:

Reference:

ASCII

ESC

? n

Hex

3F n

Decimal 27

63 n

≤

127

Cancels user-defined characters.



This command cancels the pattern defined for the character code specified by n. After

the user-defined characters are canceled, the corresponding pattern for the internal

character is printed.



This command deletes the pattern defined for the specified code in the font selected by

ESC !



If a user-defined character has not been defined for the specified character code, the

printer ignores this command.

ESC &

ESC %

ESC @

Initialize printer

Code:

Description:

Notes:

ASCII

ESC

Hex

Decimal 27

Clears the data in the print buffer and resets the printer mode to the mode that was in

effect when the power was turned on.



The DIP switch settings are not checked again.



The data in the receive buffer is not cleared.



The macro definition is not cleared.



The NV bit image data is not cleared.



The data of the user NV memory is not cleared.

Summary of Contents for TH200











































































































Search results

Summary of Contents for TH200

Reviews:

Related manuals for TH200

Brands by name

Popular brands

Wincor Nixdorf TH200, Programmer'S Manual

Search results

Summary of Contents for TH200

Reviews:

Related manuals for TH200

Brands by name

Popular brands