Wincor Nixdorf iPOS plus Advanced, User Manual

Page: 12 / 78

Manufacturer´s Certification
01900xxxxx iPOS plus Advanced – User Manual 6
Safety Notes
The iPOS plus Advanced conforms to the current safety standards for data
processing equipment.

If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be
absolutely dry
before being put into service; an acclimatization
period of at least two hours must therefore be observed.

This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.

When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily accessible.

Whenever work of any kind is done on the device, as well as when
data cables are plugged and/or unplugged, the device must be com-
pletely disconnected from the line voltage. To do so, turn the device
off and unplug the power cord.

To disconnect the device from the supply voltage completely, switch
off the device and disconnect the power plug of the system.

Never plug in or unplug data communication lines during thunder-
storms.

Protect devices from vibrations, dust, moisture and heat.

Always dispose of used parts, such as batteries, in an environmentally
safe manner.

In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched
off
immediately, the power plug disconnected and the Customer
Service of Wincor Nixdorf or your dealer must be notified.