Wincor Nixdorf CINEO C1030 Installation Manual Download Page 34

Page: 34 / 35

Appendix

Recycling the CINEO C1030

CINEO C1030 was designed according to the Wincor Nixdorf standard

“Environmentally Conscious Product Design and Development”.
CINEO C1030 is manufactured without the use of CFCs and CCHs and is

manufactured to a great extent out of materials and components which are

recyclable.
For recycling purposes do not attach any additional adhesive labels to the

device.
Wincor Nixdorf disposes of old devices in an environmentally responsible

manner at a recycling center that is ISO 9001 and ISO 14001 certified, as is

the entire company.
Follow your local regulations on the disposal of toxic waste.
Your Wincor Nixdorf vendor will answer any questions you have concerning

returns, recycling, and disposal of our products.

Summary of Contents for CINEO C1030




































Search results

Summary of Contents for CINEO C1030

Reviews:

Related manuals for CINEO C1030

Brands by name

Popular brands

Wincor Nixdorf CINEO C1030, Installation Manual

Search results

Summary of Contents for CINEO C1030

Reviews:

Related manuals for CINEO C1030

Brands by name

Popular brands