Keyboard (KYBD)
The BEETLE /S has a 6-pin mini-DIN jack for connecting a keyboard. Make
sure that the connector is plugged firmly into the socket to prevent
malfunctioning. Power is supplied to the keyboard via this socket. If you
wish to connect a standard PC keyboard with DIN connector, you must use
a special adapter cable, obtainable from the Wincor Nixdorf branch office
responsible for your area.
When removing cables with locks, please grip the cable at the connector
housing.
Scanners and scales (COM1 - COM4*)
Depending on the systems configuration, scanners without an independent
power supply are connected to the COM2*, COM3* or COM4* serial
interface (standard setting COM3). Connect scales with their own power
supply to the COM1 interface. COM1 is designed as a 9-pin D-sub plug,
whereas COM2* - COM4* are 9-pin D-sub jacks.
Make sure that the scanner connector is plugged securely into the socket to
prevent possible malfunctioning.
If scales which are not supplied by Wincor Nixdorf are connected to the
BEETLE /S, you must obtain a licence for the driver software.
The COM2 interface is without effect if the onboard TFT adapter with touch
screen function is installed.
CONNECTING PERIPHERALS
16
