Before switching on the System
Unpacking and checking the System
Unpack the parts and check to see whether the delivery matches the
information on the delivery note.
The carton contains the basic unit and a country-specific accessories kit.
Some ordered composition may be installed.
If damage has occurred during shipping or if the package contents do not
match the delivery note, promptly inform your Wincor Nixdorf sales outlet.
Transport the device only in its original packaging (to protect it against
impact and shock).
Setting up the device
Set up the BEETLE /S POS system where it will not be exposed to extreme
environmental conditions. Protect the device from vibrations, dust, moisture,
heat and strong magnetic fields.
Make sure that the side ventilation slots on the BEETLE /S POS system are
not obstructed in order to ensure that the device has sufficient ventilation.
Cabling of the BEETLE /S
Follow the steps below in the order given when installing devices:
n
Plug one end of the power cable into the socket of the BEETLE /S
n
The cable cover must be removed, if present.
n
Plug in and secure the data cable.
n
Install the cable cober.
n
Plug the other end of the power cable into the main power supply.
Always make sure that the system is switched off when you do cabling
works.
11
BEFORE SWITCHING ON THE SYSTEM
