WMP-153 User’s manual
vii
8.
If the unit is not going to be in use for an extended period
of time, remember to disconnect the unit.
9.
The medical panel PC unit uses voltage between
100-240VAC. Connect the unit to a power source with the
same numerical value as shown. Please use only the power
cord provided by the dealer to ensure safety and EMC
compliance.
Various Factors of Environment
1.
Do not insert objects into the openings.
2.
Do not have liquids seep into the internal areas of the
medical panel PC unit.
3.
Having liquids seep in or inserting objects into the unit
may result in electric shocks from taking and/or short
circuiting the internal parts.
4.
Do not place the medical panel PC unit in the presence of
high moisture areas.
5.
Do not install the medical panel PC unit in a wet
environment.
6.
Do not place near unit near heat generating sources.
7.
Do not place the unit in a location where it will come in
contact with fumes or steam.
8.
Remember to keep the medical panel PC unit away from
the presence of dust.
9.
If water has flow in or seep in, immediately disconnect the
open frame unit. Then contact a service technician for
repairs.
Ventilation Spacing
1.
Do not cover or block the openings on the top and back
sides of the display unit. Inadequate ventilation may cause
overheating thus reducing the lifespan of the unit.
2.
Unless proper ventilation is present, do not place unit in an
enclosed area; such as a built-in shelf. Keep a minimum
distance of 10 cm between the display unit and wall.
